0
0

YOLOV7改进--添加CBAM注意力机制

YOLOV7改进--添加CBAM注意力机制

因为项目需要，尝试在yolov7上加入CBAM注意力机制，看看能不能提升点性能。之前有在yolov5上添加CBAM的经验，所以直接把yolov5中的CBAM搬过来，废话不多说，直接看代码吧！

CBAM注意力机制

首先，介绍一下CBAM注意力机制：
论文来源：https://arxiv.org/pdf/1807.06521.pdf
在这里插入图片描述
Convolutional Block Attention Module (CBAM)由两个模块构成，分别为通道注意力（CAM）和空间注意力模块（SAM），CAM可以使网络关注图像的前景，使网络更加关注有意义的gt区域，而SAM可以让网络关注到整张图片中富含上下文信息的位置。这两个模块即插即用，建议串行加入到网络中（论文里面是串行比并行好，在博主的数据集下，并行和串行效果不明显，博主认为特征融合没有苛刻的要求，视使用的数据集而定，怎么连效果好就怎么连），下面的展示的代码是串行方法。

代码

在commen.py中添加CBAM模块

这部分代码同yolov5的一样，直接拿来用！

class ChannelAttention(nn.Module):
    def __init__(self, in_planes, ratio=16):
        super(ChannelAttention, self).__init__()
        self.avg_pool = nn.AdaptiveAvgPool2d(1)
        self.max_pool = nn.AdaptiveMaxPool2d(1)
        self.f1 = nn.Conv2d(in_planes, in_planes // ratio, 1, bias=False)
        self.relu = nn.ReLU()
        self.f2 = nn.Conv2d(in_planes // ratio, in_planes, 1, bias=False)
        self.sigmoid = nn.Sigmoid()

    def forward(self, x):
        avg_out = self.f2(self.relu(self.f1(self.avg_pool(x))))
        max_out = self.f2(self.relu(self.f1(self.max_pool(x))))
        out = self.sigmoid(avg_out + max_out)
        return out

class SpatialAttention(nn.Module):
    def __init__(self, kernel_size=7):
        super(SpatialAttention, self).__init__()
        assert kernel_size in (3, 7), 'kernel size must be 3 or 7'
        padding = 3 if kernel_size == 7 else 1
        self.conv = nn.Conv2d(2, 1, kernel_size, padding=padding, bias=False)
        self.sigmoid = nn.Sigmoid()

    def forward(self, x):
        avg_out = torch.mean(x, dim=1, keepdim=True)
        max_out, _ = torch.max(x, dim=1, keepdim=True)
        x = torch.cat([avg_out, max_out], dim=1)
        x = self.conv(x)
        return self.sigmoid(x)
        
class CBAM(nn.Module):
    # Standard convolution
    def __init__(self, c1, c2, k=1, s=1, p=None, g=1, act=True):  # ch_in, ch_out, kernel, stride, padding, groups
        super(CBAM, self).__init__()
        self.conv = nn.Conv2d(c1, c2, k, s, autopad(k, p), groups=g, bias=False)
        self.bn = nn.BatchNorm2d(c2)
        self.act = nn.Hardswish() if act else nn.Identity()
        self.ca = ChannelAttention(c2)
        self.sa = SpatialAttention()

    def forward(self, x):
        x = self.act(self.bn(self.conv(x)))
        x = self.ca(x) * x
        x = self.sa(x) * x
        return x

    def fuseforward(self, x):
        return self.act(self.conv(x))

在yolo.py中添加CBAM模块名

找到yolo.py第459行，加入CBAM模块名。

if m in [nn.Conv2d, Conv, RobustConv, RobustConv2, DWConv, GhostConv, RepConv, RepConv_OREPA, DownC, 
                 SPP, SPPF, SPPCSPC, GhostSPPCSPC, MixConv2d, Focus, Stem, GhostStem, CrossConv, 
                 Bottleneck, BottleneckCSPA, BottleneckCSPB, BottleneckCSPC, 
                 RepBottleneck, RepBottleneckCSPA, RepBottleneckCSPB, RepBottleneckCSPC,  
                 Res, ResCSPA, ResCSPB, ResCSPC, 
                 RepRes, RepResCSPA, RepResCSPB, RepResCSPC, 
                 ResX, ResXCSPA, ResXCSPB, ResXCSPC, 
                 RepResX, RepResXCSPA, RepResXCSPB, RepResXCSPC, 
                 Ghost, GhostCSPA, GhostCSPB, GhostCSPC,
                 SwinTransformerBlock, STCSPA, STCSPB, STCSPC,
                 SwinTransformer2Block, ST2CSPA, ST2CSPB, ST2CSPC, CBAM]:
    c1, c2 = ch[f], args[0]
    if c2 != no:  # if not output
        c2 = make_divisible(c2 * gw, 8)

    args = [c1, c2, *args[1:]]
    if m in [DownC, SPPCSPC, GhostSPPCSPC, 
                     BottleneckCSPA, BottleneckCSPB, BottleneckCSPC, 
                     RepBottleneckCSPA, RepBottleneckCSPB, RepBottleneckCSPC, 
                     ResCSPA, ResCSPB, ResCSPC, 
                     RepResCSPA, RepResCSPB, RepResCSPC, 
                     ResXCSPA, ResXCSPB, ResXCSPC, 
                     RepResXCSPA, RepResXCSPB, RepResXCSPC,
                     GhostCSPA, GhostCSPB, GhostCSPC,
                     STCSPA, STCSPB, STCSPC,
                     ST2CSPA, ST2CSPB, ST2CSPC]:
         args.insert(2, n)  # number of repeats
         n = 1

在cfg文件中添加CBAM信息

这里以添加到backbone为例，将Conv替换成CBAM即可，同样也可在FPN里替换。

# parameters
nc: 80  # number of classes
depth_multiple: 1.0  # model depth multiple
width_multiple: 1.0  # layer channel multiple

# anchors
anchors:
  - [10,13, 16,30, 33,23]  # P3/8
  - [30,61, 62,45, 59,119]  # P4/16
  - [116,90, 156,198, 373,326]  # P5/32

backbone:
  # [from, number, module, args] c2, k=1, s=1, p=None, g=1, act=True
  # [[-1, 1, Conv, [32, 3, 2, None, 1, nn.LeakyReLU(0.1)]],  # 0-P1/2 
  [[-1, 1, CBAM, [32, 3, 2, None, 1, nn.LeakyReLU(0.1)]],  # 0-P1/2  
  
  #  [-1, 1, Conv, [64, 3, 2, None, 1, nn.LeakyReLU(0.1)]],  # 1-P2/4  
   [-1, 1, CBAM, [64, 3, 2, None, 1, nn.LeakyReLU(0.1)]],  # 1-P2/4    
   
   [-1, 1, Conv, [32, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-2, 1, Conv, [32, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [32, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [32, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, -2, -3, -4], 1, Concat, [1]],
   [-1, 1, Conv, [64, 1, 1, None, 1, nn.LeakyReLU(0.1)]],  # 7
   
   [-1, 1, MP, []],  # 8-P3/8
   [-1, 1, Conv, [64, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-2, 1, Conv, [64, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [64, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [64, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, -2, -3, -4], 1, Concat, [1]],
   [-1, 1, Conv, [128, 1, 1, None, 1, nn.LeakyReLU(0.1)]],  # 14
   
   [-1, 1, MP, []],  # 15-P4/16
   [-1, 1, Conv, [128, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-2, 1, Conv, [128, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [128, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [128, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, -2, -3, -4], 1, Concat, [1]],
   [-1, 1, Conv, [256, 1, 1, None, 1, nn.LeakyReLU(0.1)]],  # 21
   
   [-1, 1, MP, []],  # 22-P5/32
   [-1, 1, Conv, [256, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-2, 1, Conv, [256, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [256, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [256, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, -2, -3, -4], 1, Concat, [1]],
   [-1, 1, Conv, [512, 1, 1, None, 1, nn.LeakyReLU(0.1)]],  # 28
  ]

# yolov7-tiny head
head:
  [[-1, 1, Conv, [256, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-2, 1, Conv, [256, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, SP, [5]],
   [-2, 1, SP, [9]],
   [-3, 1, SP, [13]],
   [[-1, -2, -3, -4], 1, Concat, [1]],
   [-1, 1, Conv, [256, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, -7], 1, Concat, [1]],
   [-1, 1, Conv, [256, 1, 1, None, 1, nn.LeakyReLU(0.1)]],  # 37
  
   [-1, 1, Conv, [128, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, nn.Upsample, [None, 2, 'nearest']],
   [21, 1, Conv, [128, 1, 1, None, 1, nn.LeakyReLU(0.1)]], # route backbone P4
   [[-1, -2], 1, Concat, [1]],
   
   [-1, 1, Conv, [64, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-2, 1, Conv, [64, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [64, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [64, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, -2, -3, -4], 1, Concat, [1]],
   [-1, 1, Conv, [128, 1, 1, None, 1, nn.LeakyReLU(0.1)]],  # 47
  
   [-1, 1, Conv, [64, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, nn.Upsample, [None, 2, 'nearest']],
   [14, 1, Conv, [64, 1, 1, None, 1, nn.LeakyReLU(0.1)]], # route backbone P3
   [[-1, -2], 1, Concat, [1]],
   
   [-1, 1, Conv, [32, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-2, 1, Conv, [32, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [32, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [32, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, -2, -3, -4], 1, Concat, [1]],
   [-1, 1, Conv, [64, 1, 1, None, 1, nn.LeakyReLU(0.1)]],  # 57
   
   [-1, 1, Conv, [128, 3, 2, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, 47], 1, Concat, [1]],
   
   [-1, 1, Conv, [64, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-2, 1, Conv, [64, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [64, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [64, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, -2, -3, -4], 1, Concat, [1]],
   [-1, 1, Conv, [128, 1, 1, None, 1, nn.LeakyReLU(0.1)]],  # 65
   
   [-1, 1, Conv, [256, 3, 2, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, 37], 1, Concat, [1]],
   
   [-1, 1, Conv, [128, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-2, 1, Conv, [128, 1, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [128, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [-1, 1, Conv, [128, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [[-1, -2, -3, -4], 1, Concat, [1]],
   [-1, 1, Conv, [256, 1, 1, None, 1, nn.LeakyReLU(0.1)]],  # 73
      
   [57, 1, Conv, [128, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [65, 1, Conv, [256, 3, 1, None, 1, nn.LeakyReLU(0.1)]],
   [73, 1, Conv, [512, 3, 1, None, 1, nn.LeakyReLU(0.1)]],

   [[74,75,76], 1, Detect, [nc, anchors]],   # Detect(P3, P4, P5)
  ]
标签： 计算机视觉 深度学习 目标检测
本文转载自: https://blog.csdn.net/qq_43114108/article/details/126019017
版权归原作者 不会吃草的猪 所有， 如有侵权，请联系我们删除。
登录后发布评论

“YOLOV7改进--添加CBAM注意力机制”的评论:

还没有评论
关于作者
...
overfit同步小助手
文章同步
相关阅读

HarmonyOS Next 加密算法框架性能优化与安全考量

从“点”到“面”，热成像防爆手机如何为安全织就“透视网”？

怎么快速安全地调整磁盘分区的大小? 5 个免费分区管理器请收好

Cursor编辑器：10秒生成完美Git提交信息！

git开发中常用命令

SpringBoot整合JPA，步骤详解（图文结合）

【人工智能概述（一）】人工智能基本概概念、学派、发展历程与新一代人工智能

文章导航