0
0

Docker搭建kafka集群

Docker搭建kafka集群

集群规划

镜像版本

  • Zookeeper采用zookeeper
  • Kafka采用wurstmeister/kafka
  • Kafka-Manager采用scjtqs/kafka-manager

kafka为什么需要依赖zookeeper

ZooKeeper 作为给分布式系统提供协调服务的工具被 kafka 所依赖。在分布式系统中，消费者需要知道有哪些生产者是可用的，而如果每次消费者都需要和生产者建立连接并测试是否成功连接，那效率也太低了，显然是不可取的。而通过使用 ZooKeeper 协调服务，Kafka 就能将 Producer，Consumer，Broker 等结合在一起，同时借助 ZooKeeper，Kafka 就能够将所有组件在无状态的条件下建立起生产者和消费者的订阅关系，实现负载均衡
1.Brork管理

在Kafka的设计中，选择了使用Zookeeper来进行所有Broker的管理，体现在zookeeper上会有一个专门用来进行Broker服务器列表记录的点，节点路径为/brokers/ids

Zookeeper用一个专门节点保存Broker服务列表，也就是 /brokers/ids。

broker启动时，向Zookeeper发送注册请求，Zookeeper会在/brokers/ids下创建这个broker节点，如/brokers/ids/[0…N]，并保存broker的IP地址和端口，Broker 创建的是临时节点，在连接断开时节点就会自动删除，所以在 ZooKeeper 上就可以通过 Broker 中节点的变化来得到 Broker 的可用性。

2、负载均衡

broker向Zookeeper进行注册后，生产者根据broker节点来感知broker服务列表变化，这样可以实现动态负载均衡。

3、Topic 信息

在 Kafka 中可以定义很多个 Topic，每个 Topic 又被分为很多个 Partition。一般情况下，每个 Partition 独立在存在一个 Broker 上，所有的这些 Topic 和 Broker 的对应关系都由 ZooKeeper 进行维护。

创建docker网络

docker network create kafaka-net --subnet 172.28.10.0/16

搭建zk集群

新建文件docker-compose-zk.yml

version:'3.4'

services:
 zook1:
   image: zookeeper:latest
   #restart: always #自动重新启动
   hostname: zook1
   container_name: zook1 #容器名称，方便在rancher中显示有意义的名称
   ports:-39181:2181 #将本容器的zookeeper默认端口号映射出去
   volumes: # 挂载数据卷 前面是宿主机即本机的目录位置，后面是docker的目录
   -"/volumn/kafaka/zkcluster/zook1/data:/data"-"/volumn/kafaka/zkcluster/zook1/datalog:/datalog"-"/volumn/kafaka/zkcluster/zook1/logs:/logs"
   environment:ZOO_MY_ID:1  #即是zookeeper的节点值，也是kafka的brokerid值
       ZOO_SERVERS: server.1=zook1:2888:3888;2181 server.2=zook2:2888:3888;2181 server.3=zook3:2888:3888;2181
   networks:
       docker-net:
           ipv4_address:172.28.10.11

 zook2:   
   image: zookeeper:latest
   #restart: always #自动重新启动
   hostname: zook2
   container_name: zook2 #容器名称，方便在rancher中显示有意义的名称
   ports:-39182:2181 #将本容器的zookeeper默认端口号映射出去
   volumes:-"/volumn/kafaka/zkcluster/zook2/data:/data"-"/volumn/kafaka/zkcluster/zook2/datalog:/datalog"-"/volumn/kafaka/zkcluster/zook2/logs:/logs"
   environment:ZOO_MY_ID:2  #即是zookeeper的节点值，也是kafka的brokerid值
       ZOO_SERVERS: server.1=zook1:2888:3888;2181 server.2=zook2:2888:3888;2181 server.3=zook3:2888:3888;2181
   networks:
       docker-net:
           ipv4_address:172.28.10.12
           
 zook3:   
   image: zookeeper:latest
   #restart: always #自动重新启动
   hostname: zook3
   container_name: zook3 #容器名称，方便在rancher中显示有意义的名称
   ports:-39183:2181 #将本容器的zookeeper默认端口号映射出去
   volumes:-"/volumn/kafaka/zkcluster/zook3/data:/data"-"/volumn/kafaka/zkcluster/zook3/datalog:/datalog"-"/volumn/kafaka/zkcluster/zook3/logs:/logs"
   environment:ZOO_MY_ID:3  #即是zookeeper的节点值，也是kafka的brokerid值
       ZOO_SERVERS: server.1=zook1:2888:3888;2181 server.2=zook2:2888:3888;2181 server.3=zook3:2888:3888;2181
   networks:
       docker-net:
           ipv4_address:172.28.10.13
networks:
 docker-net:
     name: kafaka-net

启动

docker compose -p zookeeper -f ./docker-compose-zk.yml up -d

搭建kafka集群

新建三个挂载文件

挂载原因

主要防止kafka-topics.sh命令创建主题时报错

Error: Exception thrown by the agent : java.rmi.server.ExportException: Port already in use: 9966; nested exception is:
        java.net.BindException: Address in use (Bind failed)

挂载步骤

mkdir -p /volumn/kafaka/kafka1/bin
mkdir -p /volumn/kafaka/kafka2/bin
mkdir -p /volumn/kafaka/kafka3/bin
vim kafka-run-class.sh
如果你的sh文件是从windows拷贝过来的，kafka启动时会报错：/bin/bash^M: bad interpreter: No such file or directory。vim *.sh 下执行:set ff=unix即可

#!/bin/bash
# LicensedtotheApacheSoftwareFoundation(ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# TheASF licenses this file toYou under the ApacheLicense,Version2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed toin writing, software
# distributed under the License is distributed on an "AS IS"BASIS,
# WITHOUTWARRANTIESORCONDITIONSOFANYKIND, either express or implied.
# See the Licensefor the specific language governing permissions and
# limitations under the License.if[ $# -lt 1];
then
echo "USAGE: $0 [-daemon] [-name servicename] [-loggc] classname [opts]"
exit 1
fi

# CYGWIN==1ifCygwin is detected,else0.if[[ $(uname -a)=~"CYGWIN"]]; then
CYGWIN=1elseCYGWIN=0
fi

if[-z "$INCLUDE_TEST_JARS"]; then
INCLUDE_TEST_JARS=false
fi

# Exclude jars not necessary for running commands.
regex="(-(test|test-sources|src|scaladoc|javadoc)\.jar|jar.asc)$"should_include_file(){if["$INCLUDE_TEST_JARS"=true]; then
  return0
fi
file=$1if[-z "$(echo "$file" | egrep "$regex")"]; then
  return0elsereturn1
fi
}ISKAFKASERVER="false"if[["$*"=~"kafka.Kafka"]]; then
    ISKAFKASERVER="true"
fi
base_dir=$(dirname $0)/..if[-z "$SCALA_VERSION"]; then
SCALA_VERSION=2.13.5if[[-f "$base_dir/gradle.properties"]]; then
  SCALA_VERSION=`grep "^scalaVersion=""$base_dir/gradle.properties"| cut -d=-f 2`
fi
fi

if[-z "$SCALA_BINARY_VERSION"]; then
SCALA_BINARY_VERSION=$(echo $SCALA_VERSION| cut -f 1-2-d '.')
fi

# run ./gradlew copyDependantLibs toget all dependant jars in a local dir
shopt -s nullglob
if[-z "$UPGRADE_KAFKA_STREAMS_TEST_VERSION"]; then
for dir in "$base_dir"/core/build/dependant-libs-${SCALA_VERSION}*;doCLASSPATH="$CLASSPATH:$dir/*"
done
fi

for file in "$base_dir"/examples/build/libs/kafka-examples*.jar;doif should_include_file "$file"; then
  CLASSPATH="$CLASSPATH":"$file"
fi
done

if[-z "$UPGRADE_KAFKA_STREAMS_TEST_VERSION"]; then
clients_lib_dir=$(dirname $0)/../clients/build/libs
streams_lib_dir=$(dirname $0)/../streams/build/libs
streams_dependant_clients_lib_dir=$(dirname $0)/../streams/build/dependant-libs-${SCALA_VERSION}else
clients_lib_dir=/opt/kafka-$UPGRADE_KAFKA_STREAMS_TEST_VERSION/libs
streams_lib_dir=$clients_lib_dir
streams_dependant_clients_lib_dir=$streams_lib_dir
fi

for file in "$clients_lib_dir"/kafka-clients*.jar;doif should_include_file "$file"; then
  CLASSPATH="$CLASSPATH":"$file"
fi
done

for file in "$streams_lib_dir"/kafka-streams*.jar;doif should_include_file "$file"; then
  CLASSPATH="$CLASSPATH":"$file"
fi
done

if[-z "$UPGRADE_KAFKA_STREAMS_TEST_VERSION"]; then
for file in "$base_dir"/streams/examples/build/libs/kafka-streams-examples*.jar;doif should_include_file "$file"; then
    CLASSPATH="$CLASSPATH":"$file"
  fi
done
elseVERSION_NO_DOTS=`echo $UPGRADE_KAFKA_STREAMS_TEST_VERSION| sed 's/\.//g'`
SHORT_VERSION_NO_DOTS=${VERSION_NO_DOTS:0:((${#VERSION_NO_DOTS}-1))} # remove last char, ie, bug-fix number
for file in "$base_dir"/streams/upgrade-system-tests-$SHORT_VERSION_NO_DOTS/build/libs/kafka-streams-upgrade-system-tests*.jar;doif should_include_file "$file"; then
    CLASSPATH="$file":"$CLASSPATH"
  fi
done
if["$SHORT_VERSION_NO_DOTS"="0100"]; then
  CLASSPATH="/opt/kafka-$UPGRADE_KAFKA_STREAMS_TEST_VERSION/libs/zkclient-0.8.jar":"$CLASSPATH"CLASSPATH="/opt/kafka-$UPGRADE_KAFKA_STREAMS_TEST_VERSION/libs/zookeeper-3.4.6.jar":"$CLASSPATH"
fi
if["$SHORT_VERSION_NO_DOTS"="0101"]; then
  CLASSPATH="/opt/kafka-$UPGRADE_KAFKA_STREAMS_TEST_VERSION/libs/zkclient-0.9.jar":"$CLASSPATH"CLASSPATH="/opt/kafka-$UPGRADE_KAFKA_STREAMS_TEST_VERSION/libs/zookeeper-3.4.8.jar":"$CLASSPATH"
fi
fi

for file in "$streams_dependant_clients_lib_dir"/rocksdb*.jar;doCLASSPATH="$CLASSPATH":"$file"
done

for file in "$streams_dependant_clients_lib_dir"/*hamcrest*.jar;
do
CLASSPATH="$CLASSPATH":"$file"
done

for file in "$base_dir"/shell/build/libs/kafka-shell*.jar;
do
if should_include_file "$file"; then
  CLASSPATH="$CLASSPATH":"$file"
fi
done

for dir in "$base_dir"/shell/build/dependant-libs-${SCALA_VERSION}*;
do
CLASSPATH="$CLASSPATH:$dir/*"
done

for file in "$base_dir"/tools/build/libs/kafka-tools*.jar;
do
if should_include_file "$file"; then
  CLASSPATH="$CLASSPATH":"$file"
fi
done

for dir in "$base_dir"/tools/build/dependant-libs-${SCALA_VERSION}*;
do
CLASSPATH="$CLASSPATH:$dir/*"
done

for cc_pkg in "api" "transforms" "runtime" "file" "mirror" "mirror-client" "json" "tools" "basic-auth-extension"
do
for file in "$base_dir"/connect/${cc_pkg}/build/libs/connect-${cc_pkg}*.jar;
do
  if should_include_file "$file"; then
    CLASSPATH="$CLASSPATH":"$file"
  fi
done
if [ -d "$base_dir/connect/${cc_pkg}/build/dependant-libs" ] ; then
  CLASSPATH="$CLASSPATH:$base_dir/connect/${cc_pkg}/build/dependant-libs/*"
fi
done

# classpath addition for release
for file in "$base_dir"/libs/*;
do
if should_include_file "$file"; then
  CLASSPATH="$CLASSPATH":"$file"
fi
done

for file in "$base_dir"/core/build/libs/kafka_${SCALA_BINARY_VERSION}*.jar;
do
if should_include_file "$file"; then
  CLASSPATH="$CLASSPATH":"$file"
fi
done
shopt -u nullglob

if [ -z "$CLASSPATH" ] ; then
echo "Classpath is empty. Please build the project first e.g. by running './gradlew jar -PscalaVersion=$SCALA_VERSION'"
exit 1
fi

# JMX settings
if [ -z "$KAFKA_JMX_OPTS" ]; then
KAFKA_JMX_OPTS="-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.authenticate=false  -Dcom.sun.management.jmxremote.ssl=false "
fi

# JMX port to use
# if [  $JMX_PORT ]; then
if [  $JMX_PORT ] && [ -z "$ISKAFKASERVER" ]; then
KAFKA_JMX_OPTS="$KAFKA_JMX_OPTS -Dcom.sun.management.jmxremote.port=$JMX_PORT "
fi

# Log directory to use
if [ "x$LOG_DIR" = "x" ]; then
LOG_DIR="$base_dir/logs"
fi

# Log4j settings
if [ -z "$KAFKA_LOG4J_OPTS" ]; then
# Log to console. This is a tool.
LOG4J_DIR="$base_dir/config/tools-log4j.properties"
# If Cygwin is detected, LOG4J_DIR is converted to Windows format.
(( CYGWIN )) && LOG4J_DIR=$(cygpath --path --mixed "${LOG4J_DIR}")
KAFKA_LOG4J_OPTS="-Dlog4j.configuration=file:${LOG4J_DIR}"
else
# create logs directory
if [ ! -d "$LOG_DIR" ]; then
  mkdir -p "$LOG_DIR"
fi
fi

# If Cygwin is detected, LOG_DIR is converted to Windows format.
(( CYGWIN )) && LOG_DIR=$(cygpath --path --mixed "${LOG_DIR}")
KAFKA_LOG4J_OPTS="-Dkafka.logs.dir=$LOG_DIR $KAFKA_LOG4J_OPTS"

# Generic jvm settings you want to add
if [ -z "$KAFKA_OPTS" ]; then
KAFKA_OPTS=""
fi

# Set Debug options if enabled
if [ "x$KAFKA_DEBUG" != "x" ]; then

  # Use default ports
  DEFAULT_JAVA_DEBUG_PORT="5005"

  if [ -z "$JAVA_DEBUG_PORT" ]; then
      JAVA_DEBUG_PORT="$DEFAULT_JAVA_DEBUG_PORT"
  fi

  # Use the defaults if JAVA_DEBUG_OPTS was not set
  DEFAULT_JAVA_DEBUG_OPTS="-agentlib:jdwp=transport=dt_socket,server=y,suspend=${DEBUG_SUSPEND_FLAG:-n},address=$JAVA_DEBUG_PORT"
  if [ -z "$JAVA_DEBUG_OPTS" ]; then
      JAVA_DEBUG_OPTS="$DEFAULT_JAVA_DEBUG_OPTS"
  fi

  echo "Enabling Java debug options: $JAVA_DEBUG_OPTS"
  KAFKA_OPTS="$JAVA_DEBUG_OPTS $KAFKA_OPTS"
fi

# Which java to use
if [ -z "$JAVA_HOME" ]; then
JAVA="java"
else
JAVA="$JAVA_HOME/bin/java"
fi

# Memory options
if [ -z "$KAFKA_HEAP_OPTS" ]; then
KAFKA_HEAP_OPTS="-Xmx256M"
fi

# JVM performance options
# MaxInlineLevel=15 is the default since JDK 14 and can be removed once older JDKs are no longer supported
if [ -z "$KAFKA_JVM_PERFORMANCE_OPTS" ]; then
KAFKA_JVM_PERFORMANCE_OPTS="-server -XX:+UseG1GC -XX:MaxGCPauseMillis=20 -XX:InitiatingHeapOccupancyPercent=35 -XX:+ExplicitGCInvokesConcurrent -XX:MaxInlineLevel=15 -Djava.awt.headless=true"
fi

while [ $# -gt 0 ]; do
COMMAND=$1
case $COMMAND in
  -name)
    DAEMON_NAME=$2
    CONSOLE_OUTPUT_FILE=$LOG_DIR/$DAEMON_NAME.out
    shift 2
    ;;
  -loggc)
    if [ -z "$KAFKA_GC_LOG_OPTS" ]; then
      GC_LOG_ENABLED="true"
    fi
    shift
    ;;
  -daemon)
    DAEMON_MODE="true"
    shift
    ;;
  *)
    break
    ;;
esac
done

# GC options
GC_FILE_SUFFIX='-gc.log'
GC_LOG_FILE_NAME=''
if [ "x$GC_LOG_ENABLED" = "xtrue" ]; then
GC_LOG_FILE_NAME=$DAEMON_NAME$GC_FILE_SUFFIX

# The first segment of the version number, which is '1' for releases before Java 9
# it then becomes '9', '10', ...
# Some examples of the first line of `java --version`:
# 8 -> java version "1.8.0_152"
# 9.0.4 -> java version "9.0.4"
# 10 -> java version "10" 2018-03-20
# 10.0.1 -> java version "10.0.1" 2018-04-17
# We need to match to the end of the line to prevent sed from printing the characters that do not match
JAVA_MAJOR_VERSION=$("$JAVA" -version 2>&1 | sed -E -n 's/.* version "([0-9]*).*$/\1/p')
if [[ "$JAVA_MAJOR_VERSION" -ge "9" ]] ; then
  KAFKA_GC_LOG_OPTS="-Xlog:gc*:file=$LOG_DIR/$GC_LOG_FILE_NAME:time,tags:filecount=10,filesize=100M"
else
  KAFKA_GC_LOG_OPTS="-Xloggc:$LOG_DIR/$GC_LOG_FILE_NAME -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintGCTimeStamps -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=10 -XX:GCLogFileSize=100M"
fi
fi

# Remove a possible colon prefix from the classpath (happens at lines like `CLASSPATH="$CLASSPATH:$file"` when CLASSPATH is blank)
# Syntax used on the right side is native Bash string manipulation; for more details see
# http://tldp.org/LDP/abs/html/string-manipulation.html, specifically the section titled "Substring Removal"
CLASSPATH=${CLASSPATH#:}

# If Cygwin is detected, classpath is converted to Windows format.
(( CYGWIN )) && CLASSPATH=$(cygpath --path --mixed "${CLASSPATH}")

# Launch mode
if [ "x$DAEMON_MODE" = "xtrue" ]; then
nohup "$JAVA" $KAFKA_HEAP_OPTS $KAFKA_JVM_PERFORMANCE_OPTS $KAFKA_GC_LOG_OPTS $KAFKA_JMX_OPTS $KAFKA_LOG4J_OPTS -cp "$CLASSPATH" $KAFKA_OPTS "$@" > "$CONSOLE_OUTPUT_FILE" 2>&1 < /dev/null &
else
exec "$JAVA" $KAFKA_HEAP_OPTS $KAFKA_JVM_PERFORMANCE_OPTS $KAFKA_GC_LOG_OPTS $KAFKA_JMX_OPTS $KAFKA_LOG4J_OPTS -cp "$CLASSPATH" $KAFKA_OPTS "$@"
fi

给文件添加执行权限
chmod 777 /volumn/kafaka/kafka1/bin/kafka-run-class.sh
chmod 777 /volumn/kafaka/kafka2/bin/kafka-run-class.sh
chmod 777 /volumn/kafaka/kafka3/bin/kafka-run-class.sh

新建docker-compose-kafka.yml

version:'2'

services:
 kafka1:
   image: docker.io/wurstmeister/kafka
   #restart: always #自动重新启动
   hostname: kafka1
   container_name: kafka1
   ports:-39093:9093-39193:9193
   environment:KAFKA_BROKER_ID:1KAFKA_LISTENERS:INSIDE://172.28.10.14:9093,OUTSIDE://172.28.10.14:9193
     #KAFKA_ADVERTISED_LISTENERS=INSIDE://<container>:9092,OUTSIDE://<host>:9094，outside为java程序连接的公网地址，通过 连接82.156.7.227:39193找到KAFKA_LISTENERS中的172.28.10.14:9193KAFKA_ADVERTISED_LISTENERS:INSIDE://172.28.10.14:9093,OUTSIDE://82.156.7.227:39193KAFKA_LISTENER_SECURITY_PROTOCOL_MAP:INSIDE:PLAINTEXT,OUTSIDE:PLAINTEXTKAFKA_INTER_BROKER_LISTENER_NAME:INSIDEKAFKA_ZOOKEEPER_CONNECT: zook1:2181,zook2:2181,zook3:2181ALLOW_PLAINTEXT_LISTENER:'yes'JMX_PORT:9999 #开放JMX监控端口，来监测集群数据
   volumes:-/volumn/kafaka/kafka1/wurstmeister/kafka:/wurstmeister/kafka
     -/volumn/kafaka/kafka1/kafka:/kafka
     -/volumn/kafaka/kafka1/bin/kafka-run-class.sh:/opt/kafka/bin/kafka-run-class.sh
   external_links:- zook1
     - zook2
     - zook3
   networks:
     docker-net:
       ipv4_address:172.28.10.14

 kafka2:
   image: docker.io/wurstmeister/kafka
   #restart: always #自动重新启动
   hostname: kafka2
   container_name: kafka2
   ports:-39094:9094-39194:9194
   environment:KAFKA_BROKER_ID:2KAFKA_LISTENERS:INSIDE://172.28.10.15:9094,OUTSIDE://172.28.10.15:9194
     #KAFKA_ADVERTISED_LISTENERS=INSIDE://<container>:9092,OUTSIDE://<host>:9094KAFKA_ADVERTISED_LISTENERS:INSIDE://172.28.10.15:9094,OUTSIDE://82.156.7.227:39194KAFKA_LISTENER_SECURITY_PROTOCOL_MAP:INSIDE:PLAINTEXT,OUTSIDE:PLAINTEXTKAFKA_INTER_BROKER_LISTENER_NAME:INSIDEKAFKA_ZOOKEEPER_CONNECT: zook1:2181,zook2:2181,zook3:2181ALLOW_PLAINTEXT_LISTENER:'yes'JMX_PORT:9999 #开放JMX监控端口，来监测集群数据
   volumes:-/volumn/kafaka/kafka2/wurstmeister/kafka:/wurstmeister/kafka
     -/volumn/kafaka/kafka2/kafka:/kafka
     -/volumn/kafaka/kafka2/bin/kafka-run-class.sh:/opt/kafka/bin/kafka-run-class.sh
   external_links:- zook1
     - zook2
     - zook3
   networks:
     docker-net:
       ipv4_address:172.28.10.15

 kafka3:
   image: docker.io/wurstmeister/kafka
   #restart: always #自动重新启动
   hostname: kafka3
   container_name: kafka3
   ports:-39095:9095-39195:9195
   environment:KAFKA_BROKER_ID:3KAFKA_LISTENERS:INSIDE://172.28.10.16:9095,OUTSIDE://172.28.10.16:9195
     #KAFKA_ADVERTISED_LISTENERS=INSIDE://<container>:9092,OUTSIDE://<host>:9094KAFKA_ADVERTISED_LISTENERS:INSIDE://172.28.10.16:9095,OUTSIDE://82.156.7.227:39195KAFKA_LISTENER_SECURITY_PROTOCOL_MAP:INSIDE:PLAINTEXT,OUTSIDE:PLAINTEXTKAFKA_INTER_BROKER_LISTENER_NAME:INSIDEKAFKA_ZOOKEEPER_CONNECT: zook1:2181,zook2:2181,zook3:2181ALLOW_PLAINTEXT_LISTENER:'yes'JMX_PORT:9999 #开放JMX监控端口，来监测集群数据
   volumes:-/volumn/kafaka/kafka3/wurstmeister/kafka:/wurstmeister/kafka
     -/volumn/kafaka/kafka3/kafka:/kafka
     -/volumn/kafaka/kafka3/bin/kafka-run-class.sh:/opt/kafka/bin/kafka-run-class.sh
   external_links:- zook1
     - zook2
     - zook3
   networks:
     docker-net:
       ipv4_address:172.28.10.16
networks:
 docker-net:
     name: kafaka-net

启动集群

docker-compose -f ./docker-compose-kafka.yml up -d
查看日志
 docker-compose -f ./docker-compose-kafka.yml logs

安装kafka-manager

新建 docker-compose-kafka-manager.yml

version:'2'
services:
 kafka-manager:
   image: scjtqs/kafka-manager:latest
   restart: always
   hostname: kafka-manager
   container_name: kafka-manager
   ports:-39196:9000
   external_links:  # 连接本compose文件以外的container
     - zook1
     - zook2
     - zook3
     - kafka1
     - kafka2
     - kafka3
   environment:ZK_HOSTS: zook1:2181,zook2:2181,zook3:2181KAFKA_BROKERS: kafka1:9093,kafka2:9094,kafka3:9095APPLICATION_SECRET: letmein
     KM_ARGS:-Djava.net.preferIPv4Stack=true
   networks:
     docker-net:
       ipv4_address:172.28.10.20
networks:
 docker-net:
     name: kafaka-net

启动kafka-manager

docker compose -f ./docker-compose-kafka-manager.yml up -d

配置cluster

在这里插入图片描述

测试

进入kafka

docker exec -ti kafka1 /bin/bash
cd opt/kafka_2.13-2.8.1/

创建topic

bin/kafka-topics.sh --create --zookeeper zook1:2181 --replication-factor 2 --partitions 2 --topic partopic

查看topic的状态

bin/kafka-topics.sh --describe --zookeeper zook1:2181 --topic partopic
标签： kafka docker 分布式
本文转载自: https://blog.csdn.net/weixin_48412846/article/details/128724377
版权归原作者 想去22世纪 所有， 如有侵权，请联系我们删除。
登录后发布评论

“Docker搭建kafka集群”的评论:

还没有评论
关于作者
...
overfit同步小助手
文章同步
相关阅读

网络安全法-网络运行安全

使用selenium/drissionpage时如何阻止chrome自动跳转http到https

docker desktop 里部署的Open WebUI 管理员密码忘记了的处理方法

在ubuntu20.04中搭建onsite比赛运行环境

利用开源的低代码表单设计器FcDesigner高效管理和渲染复杂表单结构

Kafka学习笔记

【前端】浏览器输入url到页面呈现发生了什么？

文章导航