Kibana配置ES集群（版本号8.3.3）

一、解压授权

tar-xzvf kibana-8.3.3-linux-x86_64.tar.gz
chown-R elasticsearch101  kibana-8.3.3　　  

二、修改配置文件

cd kibana-8.3.3/config
vim kibana.yml

# For more configuration options see the configuration guide for Kibana in# https://www.elastic.co/guide/index.html# =================== System: Kibana Server ===================# Kibana is served by a back end server. This setting specifies the port to use.#server.port: 5601# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.# The default is 'localhost', which usually means remote machines will not be able to connect.# To allow connections from remote users, set this parameter to a non-loopback address.#ip地址配置
server.host: "192.168.159.101"# Enables you to specify a path to mount Kibana at if you are running behind a proxy.# Use the `server.rewriteBasePath` setting to tell Kibana if it should remove the basePath# from requests it receives, and to prevent a deprecation warning at startup.# This setting cannot end in a slash.#server.basePath: ""# Specifies whether Kibana should rewrite requests that are prefixed with# `server.basePath` or require that they are rewritten by your reverse proxy.# Defaults to `false`.#server.rewriteBasePath: false# Specifies the public URL at which Kibana is available for end users. If# `server.basePath` is configured this URL should end with the same basePath.#server.publicBaseUrl: ""# The maximum payload size in bytes for incoming server requests.#server.maxPayload: 1048576# The Kibana server's name. This is used for display purposes.#server.name: "your-hostname"# =================== System: Kibana Server (Optional) ===================# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.# These settings enable SSL for outgoing requests from the Kibana server to the browser.#server.ssl.enabled: false#server.ssl.certificate: /path/to/your/server.crt#server.ssl.key: /path/to/your/server.key# =================== System: Elasticsearch ===================# The URLs of the Elasticsearch instances to use for all your queries.#配置集群地址
elasticsearch.hosts: ["http://192.168.159.101:9200","http://192.168.159.101:9200","http://192.168.159.102:9200"]# If your Elasticsearch is protected with basic authentication, these settings provide# the username and password that the Kibana server uses to perform maintenance on the Kibana# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which# is proxied through the Kibana server.#elasticsearch.username: "kibana_system"#elasticsearch.password: "pass"# Kibana can also authenticate to Elasticsearch via "service account tokens".# Service account tokens are Bearer style tokens that replace the traditional username/password based configuration.# Use this token instead of a username/password.# elasticsearch.serviceAccountToken: "my_token"# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of# the elasticsearch.requestTimeout setting.#elasticsearch.pingTimeout: 1500# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value# must be a positive integer.#elasticsearch.requestTimeout: 30000# The maximum number of sockets that can be used for communications with elasticsearch.# Defaults to `Infinity`.#elasticsearch.maxSockets: 1024# Specifies whether Kibana should use compression for communications with elasticsearch# Defaults to `false`.#elasticsearch.compression: false# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side# headers, set this value to [] (an empty list).#elasticsearch.requestHeadersWhitelist: [ authorization ]# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.#elasticsearch.customHeaders: {}# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.#elasticsearch.shardTimeout: 30000# =================== System: Elasticsearch (Optional) ===================# These files are used to verify the identity of Kibana to Elasticsearch and are required when# xpack.security.http.ssl.client_authentication in Elasticsearch is set to required.#elasticsearch.ssl.certificate: /path/to/your/client.crt#elasticsearch.ssl.key: /path/to/your/client.key# Enables you to specify a path to the PEM file for the certificate# authority for your Elasticsearch instance.#elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]# To disregard the validity of SSL certificates, change this setting's value to 'none'.#elasticsearch.ssl.verificationMode: full# =================== System: Logging ===================# Set the value of this setting to off to suppress all logging output, or to debug to log everything. Defaults to 'info'#logging.root.level: debug# Enables you to specify a file where Kibana stores log output.#logging.appenders.default:#  type: file#  fileName: /var/logs/kibana.log#  layout:#    type: json# Logs queries sent to Elasticsearch.#logging.loggers:#  - name: elasticsearch.query#    level: debug# Logs http responses.#logging.loggers:#  - name: http.server.response#    level: debug# Logs system usage information.#logging.loggers:#  - name: metrics.ops#    level: debug# =================== System: Other ===================# The path where Kibana stores persistent data not saved in Elasticsearch. Defaults to data#path.data: data# Specifies the path where Kibana creates the process ID file.#pid.file: /run/kibana/kibana.pid# Set the interval in milliseconds to sample system and process performance# metrics. Minimum is 100ms. Defaults to 5000ms.#ops.interval: 5000# Specifies locale to be used for all localizable strings, dates and number formats.# Supported languages are the following: English (default) "en", Chinese "zh-CN", Japanese "ja-JP", French "fr-FR".#配置中文显示
i18n.locale: "zh-CN"# =================== Frequently used (Optional)===================# =================== Saved Objects: Migrations ===================# Saved object migrations run at startup. If you run into migration-related issues, you might need to adjust these settings.# The number of documents migrated at a time.# If Kibana can't start up or upgrade due to an Elasticsearch `circuit_breaking_exception`,# use a smaller batchSize value to reduce the memory pressure. Defaults to 1000 objects per batch.#migrations.batchSize: 1000# The maximum payload size for indexing batches of upgraded saved objects.# To avoid migrations failing due to a 413 Request Entity Too Large response from Elasticsearch.# This value should be lower than or equal to your Elasticsearch cluster’s `http.max_content_length`# configuration option. Default: 100mb#migrations.maxBatchSizeBytes: 100mb# The number of times to retry temporary migration failures. Increase the setting# if migrations fail frequently with a message such as `Unable to complete the [...] step after# 15 attempts, terminating`. Defaults to 15#migrations.retryAttempts: 15# =================== Search Autocomplete ===================# Time in milliseconds to wait for autocomplete suggestions from Elasticsearch.# This value must be a whole number greater than zero. Defaults to 1000ms#unifiedSearch.autocomplete.valueSuggestions.timeout: 1000# Maximum number of documents loaded by each shard to generate autocomplete suggestions.# This value must be a whole number greater than zero. Defaults to 100_000#unifiedSearch.autocomplete.valueSuggestions.terminateAfter: 100000

三、配置开机自启

#进入到目录
cd /etc/init.d
#创建kibana系统启动服务文件
vim kibana

注意kibana只支持非root启动，我没有新建用户，还是用的elasticsearch101

#!/bin/bash#chkconfig: 345 63 37#description: kibana#processname:kibana-8.3.3exportKIBANA_HOME=/usr/local/kibana/kibana-8.3.3

case$1in
        start)su elasticsearch101<<!cd$KIBANA_HOME
                ./bin/kibana  -p pid &exit!echo"kibana is started";;
        stop)pid=`cat $KIBANA_HOME/pid`kill-9$pidecho"kibana is stopped";;
        restart)pid=`cat $KIBANA_HOME/pid`kill-9$pidecho"kibana is stopped"sleep5su elasticsearch101<<!cd$KIBANA_HOME
                ./bin/kibana  -p pid &exit!echo"kibana is started";;
    *)echo"start|stop|restart";;esacexit0

#修改文件权限chmod777 kibana
#添加系统服务chkconfig--add kibana　　　　
#删除系统服务chkconfig--del kibana
#启动service kibana start　　　　　
#停止service kibana stop　
#重启service kibana restart
#开启开机自启chkconfig kibana on　
#关闭开机自启chkconfig kibana off　

firewall-cmd --zone=public --add-port=5601/tcp --permanent

firewall-cmd --reload