【kubernetes】k8s集群搭建（完整详解）

一、准备工作

环境基于Redhat8.5版本

1、准备三台虚拟机，IP地址为

master：192.168.10.129

node1：192.168.10.134

node2：192.168.10.136

也可以在一台上做，然后克隆另外俩台，修改主机名

二、配置

1、修改主机名

#在主节点的虚拟机
[root@mgr1 ~]# hostnamectl set-hostname k8s-master
#在node1的虚拟机
[root@mgr2 ~]# hostnamectl set-hostname k8s-node1
#在node2的虚拟机
[root@mgr3 ~]# hostnamectl set-hostname k8s-node2

2、修改hosts文件

[root@k8s-master ~]# vim /etc/hosts
192.168.10.129 k8s-master
192.168.10.134 k8s-node1
192.168.10.136 k8s-node2
#在node1，node2也是上面一样配置

3、关闭防火墙和SELinux

#三台都做
[root@k8s-master ~]# setenforce 0 
[root@k8s-node1 ~]# systemctl stop firewalld.service 
[root@k8s-node1 ~]# systemctl disable firewalld.service

4、关闭swap

#三台节点都做，注释掉包含swap这一行
[root@k8s-master ~]# vim /etc/fstab 
#/dev/mapper/rhel-swap   none                    swap    defaults        0 0

5、修改网卡配置

#三台节点都做
[root@k8s-master ~]# vim /etc/sysctl.d/kubernetes.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
[root@k8s-master ~]# sysctl -p

6、系统模块配置

#三台节点都做
[root@k8s-master ~]# modprobe br_netfilter    #加载系统模块
[root@k8s-master ~]# lsmod | grep br_netfilter

7、免密登录

#三台都做
[root@k8s-master ~]ssh-keygen 
[root@k8s-master ~]ssh-copy-id [email protected]
[root@k8s-master ~]ssh-copy-id [email protected]
[root@k8s-master ~]ssh-copy-id [email protected]

8、安装k8s和docker

#三个节点都需要做
#配置yum源
[root@k8s-master ~]# cd /etc/yum.repos.d/
[root@k8s-master yum.repos.d]# cat k8s.repo 
[k8s]
name=k8s
baseurl=http://mirrors.ustc.edu.cn/kubernetes/yum/repos/kubernetes-el7-x86_64/
gpgcheck=0
[root@k8s-master yum.repos.d]# mount /dev/sr0 /mnt/
[root@master yum.repos.d]# wget -O /etc/yum.repos.d/docker-ce.repo https://download.docker.com/linux/centos/docker-ce.repo

sed -i 's+download.docker.com+mirrors.tuna.tsinghua.edu.cn/docker-ce+' /etc/yum.repos.d/docker-ce.repo

dnf install -y yum-utils device-mapper-persistent-data lvm2
dnf install -y kubelet kubeadm kubectl
dnf remove podman -y
dnf install -y docker-ce
dnf install -y iproute-tc yum-utils device-mapper-persistent-data lvm2 kubelet-1.21.3 kubeadm-1.21.3 kubectl-1.21.3 docker-ce

#初始化
systemctl enable kubelet 
systemctl enable --now docker

修改docker配置文件

[root@k8s-master ~]# systemctl start docker    #docker初始化
[root@k8s-master ~]# vim /etc/docker/daemon.json
{
    "exec-opts": ["native.cgroupdriver=systemd"],
    "registry-mirrors": ["https://8zs3633v.mirror.aliyuncs.com"]
}
[root@k8s-master ~]# systemctl restart docker
[root@k8s-master ~]# systemctl enable docker.service

9、查看k8s集群需要的镜像版本

注意：三个节点都需要做

[root@k8s-master yum.repos.d]# kubeadm config images list

再拉取这些镜像，执行一下步骤

docker pull kittod/kube-apiserver:v1.21.3
docker pull kittod/kube-controller-manager:v1.21.3
docker pull kittod/kube-scheduler:v1.21.3
docker pull kittod/kube-proxy:v1.21.3
docker pull kittod/pause:3.4.1
docker pull kittod/etcd:3.4.13-0
docker pull kittod/coredns:v1.8.0
docker pull kittod/flannel:v0.14.0

拉取完成后执行改变coredns的标记不然后面会找不到镜像，执行一下步骤

docker tag kittod/kube-apiserver:v1.21.3 k8s.gcr.io/kube-apiserver:v1.21.3
docker tag kittod/kube-controller-manager:v1.21.3 k8s.gcr.io/kube-controller-manager:v1.21.3
docker tag kittod/kube-scheduler:v1.21.3 k8s.gcr.io/kube-scheduler:v1.21.3
docker tag kittod/kube-proxy:v1.21.3 k8s.gcr.io/kube-proxy:v1.21.3
docker tag kittod/pause:3.4.1 k8s.gcr.io/pause:3.4.1
docker tag kittod/etcd:3.4.13-0 k8s.gcr.io/etcd:3.4.13-0
docker tag kittod/coredns:v1.8.0 k8s.gcr.io/coredns/coredns:v1.8.0
docker tag kittod/flannel:v0.14.0 quay.io/coreos/flannel:v0.14.0

10、初始化Master节点

kubeadm init \
--kubernetes-version=v1.21.3 \
--pod-network-cidr=10.244.0.0/16 \
--service-cidr=10.96.0.0/12 \
--apiserver-advertise-address=192.168.10.129 \

如果出现这个错误：

[ERROR NumCPU]: the number of available CPUs 1 is less than the required 2

加上这个 ** --ignore-preflight-errors=all **

如果还不成功：
systemctl stop kubelet
rm -rf /etc/kubernetes/*
systemctl stop docker
如果停止失败
reboot
docker container prune
docer ps -a
如果没有容器，就说明删干净了
rm -rf /var/lib/kubelet/
rm -rf /var/lib/etcd

初始化成功后会出现以下内容

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.10.129:6443 --token xwvae1.05gyglinbz62ui3i
--discovery-token-ca-cert-hash sha256:f2701ff3276b5c260900314f3871ba5593107809b62d741c05f452caad62ffa8

根据提示，操作

[root@k8s-master ~]# mkdir -p $HOME/.kube
[root@k8s-master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@k8s-master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config
[root@k8s-master ~]# export KUBECONFIG=/etc/kubernetes/admin.conf

11、node配置

#俩node节点上做
[root@k8s-node1 ~]# kubeadm join 192.168.10.129:6443 --token xwvae1.05gyglinbz62ui3i --discovery-token-ca-cert-hash sha256:f2701ff3276b5c260900314f3871ba5593107809b62d741c05f452caad62ffa8

如果加入失败：
1、kubeadm reset -y
2、
rm -rf /etc/kubernetes/kubelet.conf
rm -rf /etc/kubernetes/pki/ca.crt
systemctl restart kubelet

1）在master上查看节点状态

[root@k8s-master ~]# kubectl get nodes
NAME         STATUS     ROLES                  AGE     VERSION
k8s-master   NotReady   control-plane,master   3m48s   v1.21.3
k8s-node1    NotReady   <none>                 3m9s    v1.21.3
k8s-node2    NotReady   <none>                 3m6s    v1.21.3

发现此时是notready

2）查看集群pod状态

[root@k8s-master ~]# kubectl get pod -n kube-system
NAME                                 READY   STATUS    RESTARTS   AGE
coredns-558bd4d5db-46dzt             0/1     Pending   0          4m54s
coredns-558bd4d5db-vpqgl             0/1     Pending   0          4m54s
etcd-k8s-master                      1/1     Running   0          5m7s
kube-apiserver-k8s-master            1/1     Running   0          5m7s
kube-controller-manager-k8s-master   1/1     Running   0          5m7s
kube-proxy-bjxgt                     1/1     Running   0          4m32s
kube-proxy-bmjnz                     1/1     Running   0          4m54s
kube-proxy-z6jzl                     1/1     Running   0          4m29s
kube-scheduler-k8s-master            1/1     Running   0          5m7s

3）再看节点上查看日志

[root@k8s-master ~]# journalctl -f -u kubelet
-- Logs begin at Fri 2022-09-30 16:34:04 CST. --
Sep 30 17:57:25 k8s-master kubelet[23732]: E0930 17:57:25.097653   23732 kubelet.go:2211] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:docker: network plugin is not ready: cni config uninitialized"
Sep 30 17:57:28 k8s-master kubelet[23732]: I0930 17:57:28.035887   23732 cni.go:239] "Unable to update cni config" err="no networks found in /etc/cni/net.d"
Sep 30 17:57:30 k8s-master kubelet[23732]: E0930 17:57:30.104181   23732 kubelet.go:2211] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:docker: network plugin is not ready: cni config uninitialized"

出现了个错误

    runtime network not ready: NetworkReady=false reason:NetworkPluginNotReady message:docker: network plugin is not ready: cni config uninitialized

解决问题：
它说网络未准备好，缺少一个网络插件，那就安装一个

#在master上输入
kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

再一次检查

[root@k8s-master ~]# kubectl get nodes
NAME         STATUS   ROLES                  AGE   VERSION
k8s-master   Ready    control-plane,master   45h   v1.21.3
k8s-node1    Ready    <none>                 45h   v1.21.3
k8s-node2    Ready    <none>                 45h   v1.21.3

master和node都ready了

12、拉取Nginx镜像进行配置

注意：只在master上做

docker pull nginx
#重新标记
docker tag nginx:latest kittod/nginx:1.21.5

创建部署

kubectl create deployment nginx --image=kittod/nginx:1.21.5

暴露端口

kubectl expose deployment nginx --port=80 --type=NodePort

查看pod和服务

[root@k8s-master ~]# kubectl get pods,service
NAME                         READY   STATUS    RESTARTS   AGE
pod/nginx-8675954f95-cvkvz   1/1     Running   0          2m20s

NAME                 TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
service/kubernetes   ClusterIP   10.96.0.1       <none>        443/TCP        46h
service/nginx        NodePort    10.98.220.104   <none>        80:30288/TCP   2m10s

查看映射的随机端口

[root@k8s-master ~]# netstat -lntup | grep kube-proxy
tcp        0      0 127.0.0.1:10249         0.0.0.0:*               LISTEN      3834/kube-proxy     
tcp        0      0 0.0.0.0:30288           0.0.0.0:*               LISTEN      3834/kube-proxy     
tcp6       0      0 :::10256                :::*                    LISTEN      3834/kube-proxy

测试Nginx服务

完成。

标签： kubernetes linux docker

本文转载自: https://blog.csdn.net/weixin_59128094/article/details/127111476
版权归原作者维运所有，如有侵权，请联系我们删除。